Sensing, gaging and locating the structural damage inside the wooden wall structure using vibration response is a proven technology and many research articles are published in this thematic area. The damage detection is usually carried out by monitoring and assessing damagesensitive parameters such as resonant frequencies and operating deflection shapes. However, in this article we propose a novel methodology based on FRF curvature and transmissibility based on the vibration response data as a quantitative parameter to detect and locate damage inside a wall structure. Mock damage was created in one of the structural wooden partition wall of a specially built room and its vibration response was measured. Damage-sensitive factors were taken out from the frequency response data and applied for gaging the damage quantitatively. For locating the damage region, quantitative parameters method, i.e. broadband FRF curvature and transmissibility methods were utilized. These techniques if commercialized, can save billions of dollars in pest control.